Help
Setup
- To setup your eBling device, read the Get Started guide
Power on/off
- Press the button on the back to turn the device on/off
- If that doesn't work, find the small hole on the back of the device above the power button, use a paperclip and press the button in that hole. That will reset the device and turn it on/off
Charging
- Use a USB Type-C cable
- Connect the correct end to the eBling device and the other end to a power source
- You can still use the device while it’s charging
Battery
- Lasts 12-24 hours of continuous use
- Actual time will vary based on brightness settings and content type
Changing NFTs on the eBling
- To advance to the next NFTs, press (1 sec) the right side of the touch screen
- To go the previous NFT, press (1 sec) on the left side of the touch screen
Factory Reset of eBling
- turn it off and hold the power button when you turn it back on
- this will delete all paired devices and NFTs
Touch screen
- Tap and hold for 1 sec to select for any touch screen interactions
Clear all data
- On iOS go to bluetooth settings and forget all eBlings
- Open the Electron Mint app, look in the top right corner and tap the settings icon. Then tap scroll to the bottom and tap “Permanently delete all app data”
Firmware update
- Connect your eBling device to the mobile app. Once connected, tap the eBling tab in the app and find the update firmware button at the top.
System status screen
- Long press anywhere on the screen for 10 seconds. This will bring up a screen with the following information:
- Firmware version
- Connection ID
- FCC ID
- Electron mint website
User manual
Contact Us
- If your having issues with your device or the mobile app. Please email us at help@electronmint.com
- Include your name, detailed description of your issue, the firmware version of your eBling device and the version of your mobile app